 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 MUR420 and MUR460 are Preferred Devices SwitchmodeTM Power Rectifiers . . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state-of-the-art devices have the following features: http://onsemi.com * * * * * * Ultrafast 25, 50 and 75 Nanosecond Recovery Times 175C Operating Junction Temperature Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction Reverse Voltage to 600 Volts ULTRAFAST RECTIFIERS 4.0 AMPERES 50-600 VOLTS Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 1.1 gram (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * Lead and Mounting Surface Temperature for Soldering Purposes: * * * * 220C Max. for 10 Seconds, 1/16 from case Shipped in plastic bags, 5,000 per bag Available Tape and Reeled, 1500 per reel, by adding a "RL'' suffix to the part number Polarity: Cathode indicated by Polarity Band Marking: MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 Leads are Readily Solderable AXIAL LEAD CASE 267-05 (DO-201AD) STYLE 1 MARKING DIAGRAM MUR4xx MUR4xx = Device Code xx = 05, 10, 15, 20, 40, 60 ORDERING INFORMATION Device MUR405 MUR405RL MUR410 MUR410RL MUR415 MUR415RL MUR420 MUR420RL MUR440 MUR440RL MUR460 MUR460RL Package Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Shipping 5000 Units/Bag 1500/Tape & Reel 5000 Units/Bag 1500/Tape & Reel 5000 Units/Bag 1500/Tape & Reel 5000 Units/Bag 1500/Tape & Reel 5000 Units/Bag 1500/Tape & Reel 5000 Units/Bag 1500/Tape & Reel MAXIMUM RATINGS Please See the Table on the Following Page Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2002 1 March, 2002 - Rev. 5 Publication Order Number: MUR420/D MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 MAXIMUM RATINGS MUR Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Square Wave) (Mounting Method #3 Per Note 2) Nonrepetitive Peak Surge Current (Surge applied at rated load conditions, half wave, single phase, 60 Hz) Operating Junction Temperature & Storage Temperature Symbol VRRM VRWM VR IF(AV) IFSM 405 50 410 100 415 150 420 200 440 400 460 600 Unit Volts 4.0 @ TA = 80C 125 4.0 @ TA = 40C 70 Amps Amps TJ, Tstg *65 to +175 C THERMAL CHARACTERISTICS Maximum Thermal Resistance, Junction to Ambient RJA See Note 2 C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 1) (iF = 3.0 Amps, TJ = 150C) (iF = 3.0 Amps, TJ = 25C) (iF = 4.0 Amps, TJ = 25C) Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, TJ = 150C) (Rated dc Voltage, TJ = 25C) Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amp/s) (IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 Amp) Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A/s, Recovery to 1.0 V) 1. Pulse Test: Pulse Width = 300 s, Duty Cycle v 2.0%. vF 0.710 0.875 0.890 iR 150 5.0 trr 35 25 tfr 25 75 50 50 ns 250 10 ns 1.05 1.25 1.28 A Volts http://onsemi.com 2 MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 MUR405, MUR410, MUR415, MUR420 100 IR, REVERSE CURRENT (m A) 70 50 30 20 i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 0.008 0.004 0.002 0 20 40 60 80 100 120 140 VR, REVERSE VOLTAGE (VOLTS) TJ = 175C 100C 10 7.0 5.0 3.0 2.0 TJ = 175C 25C 100C 25C 160 180 200 Figure 2. Typical Reverse Current IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 10 8.0 6.0 4.0 2.0 0 dc SQUARE WAVE Rated VR RqJA = 28C/W 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0 50 100 150 200 250 vF, INSTANTANEOUS VOLTAGE (VOLTS) TA, AMBIENT TEMPERATURE (C) Figure 1. Typical Forward Voltage Figure 3. Current Derating (Mounting Method #3 Per Note 2) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 SQUAREWAVE (Capacitive IPK =20 IAV Load) 10 5.0 C, CAPACITANCE (pF) 200 TJ = 25C 100 90 80 70 60 50 40 30 20 dc 0 10 20 30 40 50 IF(AV), AVERAGE FORWARD CURRENT (AMPS) VR, REVERSE VOLTAGE (VOLTS) Figure 4. Power Dissipation Figure 5. Typical Capacitance http://onsemi.com 3 MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 MUR440, MUR460 20 IR, REVERSE CURRENT (m A) 400 200 80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 0.008 0.004 TJ = 175C 10 7.0 5.0 3.0 2.0 100C 25C i F , INSTANTANEOUS FORWARD CURRENT (AMPS) TJ = 175C 25C 100C 0 100 200 300 400 500 600 700 1.0 0.7 0.5 0.3 0.2 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 10 8.0 6.0 4.0 2.0 0 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Reverse Current Rated VR RqJA = 28C/W 0.1 0.07 0.05 0.03 0.02 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 dc SQUARE WAVE 0 50 100 150 200 250 vF, INSTANTANEOUS VOLTAGE (VOLTS) TA, AMBIENT TEMPERATURE (C) Figure 6. Typical Forward Voltage Figure 8. Current Derating (Mounting Method #3 Per Note 2) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 14 12 10 8.0 6.0 4.0 2.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 10 (Capacitive IPK =20 IAV Load) SQUAREWAVE 5.0 C, CAPACITANCE (pF) dc 40 30 20 TJ = 25C 10 9.0 8.0 7.0 6.0 5.0 4.0 7.0 8.0 9.0 10 0 10 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 20 30 40 VR, REVERSE VOLTAGE (VOLTS) 50 Figure 9. Power Dissipation Figure 10. Typical Capacitance http://onsemi.com 4 MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 NOTE 2 -- AMBIENT MOUNTING DATA Data shown for thermal resistance junction-to-ambient (RJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RJA IN STILL AIR Mounting Method 1 2 RJA 3 Lead Length, L (IN) 1/8 1/4 1/2 3/4 50 51 53 55 58 59 61 63 28 Units C/W C/W C/W MOUNTING METHOD 1 P.C. Board Where Available Copper Surface area is small. L L EEEEEEEEEEEE EEEEEEEEEEE EEEEEEEEEEE MOUNTING METHOD 2 Vector Push-In Terminals T-28 L L MOUNTING METHOD 3 P.C. Board with 1-1/2 x 1-1/2 Copper Surface EE EE EE EE EE EE EE EE L = 1/2 Board Ground Plane http://onsemi.com 5 MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 PACKAGE DIMENSIONS AXIAL LEAD CASE 267-05 (DO-201AD) ISSUE G K D 1 A 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B D K INCHES MIN MAX 0.287 0.374 0.189 0.209 0.047 0.051 1.000 --MILLIMETERS MIN MAX 7.30 9.50 4.80 5.30 1.20 1.30 25.40 --- B K STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE http://onsemi.com 6 MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 Notes http://onsemi.com 7 MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 8 MUR420/D |
Price & Availability of MUR460
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |